Bottom Paint Recoat
Bottom Paint Recoat
Bottom paint is used to prevent marine growth on boat bottoms.
A bottom paint recoat is recommended for boats in good condition that don’t have a build up of paint that needs to be removed.
It’s important to know what paint was used on your boat last.
Bottom Paint Recoat
Bottom paint recoat includes:
Prep Work
- Scrap Off Left Over Dirt, Algae & Hard Barnacles
- Scrub with a Coarse Scotch-brite Pad (Old Bottom Paint Must Be Well Adhered)
- Mask Off Areas Such as the Waterline & Hardware
Application
- Apply 2 Coats of Bottom Paint. Allow the First Coat to Dry Completely Before Applying Additional Coats. Most Paints Require at Least Two Coats for Optimal Protection.
Suitable for Power & Sail
Micron CSC Provides Long Lasting Multi Season Protection Against All Kinds of Fouling Threats, in All Conditions. The Controlled Polishing Also Reduces the Buildup of Old Coatings & Minimizes Sanding. The Most Trusted & Dependable Antifouling Among Boat Owners, Applicators & Builders.
- Proven & Trusted Multi Season Performance
- Quick Drying Formula for a Faster Application
- Minimizes Paint Buildup & Sanding
- Suitable for Power & Sail, in All Waters
Package 1
Interlux Micron CSC
Suitable for Power & Sail
Micron CSC Provides Long lasting Multi season Protection Against All Kinds of Fouling Threats, in All Conditions. The Controlled Polishing Also Reduces the Build-up of Old Coatings & Minimizes Sanding. The Most Trusted & Dependable Antifouling Among Boat Owners, Applicators & Builders.
- Proven & Trusted Multi Season Performance
- Quick Drying Formula for a Faster Application
- Minimizes Paint Buildup & Sanding
- Suitable for Power & Sail, in All Waters
Suitable for Power & Sail
Fiberglass Bottomkote NT (New Technology) is Formulated with Unique Dual Resin Technology, Providing the Benefits of Both Hard & Ablative Antifoulings. Combines Durability, Preventing Premature Wear-through, with Slow Polishing, Ensuring Consistent Antifouling Performance & a Smooth Finish.
- Provides Seasonal Protection
- Dual Resin Technology Minimizes Buildup & Sanding
- Paint & Launch on the Same Day
Compatible with All Interlux Bottom Paints
Suitable for Power & Sail
Fiberglass Bottomkote NT (New Technology) is Formulated with Unique Dual Resin Technology, Providing the Benefits of Both Hard & Ablative Antifoulings. Combines Durability, Preventing Premature Wear-through, with Slow Polishing, Ensuring Consistent Antifouling Performance & a Smooth Finish.
- Provides Seasonal Protection
- Dual Resin Technology Minimizes Build-up & Sanding
- Paint & Launch on the Same Day
Compatible with All Interlux Bottom Paints
Ideal for Racing & Cruising Boats
VC 17m is a High Performance, Friction Reducing Antifouling Formulated with Fluoro-microadditive to Produce a Super Smooth Racing Finish. The Coating is Up to Eight Times Thinner Than Traditional Paint, Reducing Weight & Drag Surface, While Virtually Eliminating Paint Build-up. Suitable for Use in Fresh Water or Low Fouling Cold Salt Water.
- Protection Against Fouling Including Zebra Mussels
- Thin Film with a Fluoro-microadditive Creates a Smooth, Low Friction Surface, Ideal for Racing & Cruising Boats
- Quick Drying for a Fast Relaunch
Compatible with Interlux VC 17m
Package 3
Interlux VC 17m Antifouling Paint
Ideal for Racing & Cruising Boats
VC 17m is a High Performance, Friction Reducing Antifouling Formulated with Fluoro-microadditive to Produce a Super-smooth Racing Finish. The Coating is Up to Eight Times Thinner Than Traditional Paint, Reducing Weight & Drag Surface, While Virtually Eliminating Paint Build-up. Suitable for Use in Fresh Water or Low Fouling Cold Salt Water.
- Protection Against Fouling Including Zebra Mussels
- Thin Film with a Fluoro-microadditive Creates a Smooth, Low Friction Surface, Ideal for Racing & Cruising Boats
- Quick Drying for a Fast Relaunch
Compatible with Interlux VC 17m
Ideal for High Performance or Racing Sail & Power Boats
Interlux VC Offshore is a Hard Antifouling Tailored for High Performance or Racing Sail & Power Boats. Formulated with a Fluoro-microadditive That Creates a Hard, Smooth & Low Friction Surface Which Can Be Polished to Achieve a Very Low Profile with Maximum Durability.
- Provides a Hard, Smooth Racing Finish
- Can Be Polished to Achieve a Low Profile & Minimum Drag
- Suitable for Use in Both Fresh & Salt Water
Compatible with Interlux VC Offshore
Ideal for High Performance or Racing Sail & Power Boats
Interlux VC Offshore is a Hard Antifouling Tailored for High Performance or Racing Sail & Power Boats. Formulated with a Fluoro-microadditive That Creates a Hard, Smooth & Low-friction Surface Which Can Be Polished to Achieve a Very Low Profile with Maximum Durability.
- Provides a Hard, Smooth Racing Finish
- Can Be Polished to Achieve a Low Profile & Minimum Drag
- Suitable for Use in Both Fresh & Salt Water
Compatible with Interlux VC Offshore
Schedule Your Yacht Cleaning Today
GET AN ESTIMATE
We are located at the Shelter Island Marina & are Mobile from West Vancouver to Richmond.
We provide service in all Marinas & waterfront homes in Vancouver, North Vancouver, West Vancouver, Horseshoe Bay, Lions Bay, Deep Cove, Port Moody & Richmond.
Open Monday to Friday 8am to 5pm. Closed Saturdays, Sundays & Holidays
Contact Us
Thank you for your request, we will get back to you shortly.
Carrie Vukelic | Owner
P: 604-329-3536
E: carrie@damesmarineservices.com
Please try again later.
Schedule Your Yacht Cleaning Today
GET AN ESTIMATE
We are located at the Shelter Island Marina & are Mobile from West Vancouver to Richmond.
We provide service in all Marinas & waterfront homes in Vancouver, North Vancouver, West Vancouver, Horseshoe Bay, Lions Bay, Deep Cove, Port Moody & Richmond.
Open Monday to Friday 8am to 5pm. Closed Saturdays, Sundays & Holidays
Contact Us
Thank you for your request, we will get back to you shortly.
Carrie Vukelic | Owner
P: 604-329-3536
E: carrie@damesmarineservices.com
Please try again later.
